When it comes to industrial equipment one of the most important things to do is to maintain every part of the machine properly. Maintenance is the one thing that will keep and possibly extend the lifespan of your investment.
When it comes to essential and costly equipment maintenance should be the keyword. A schedule should be made up and adhered to that checks off every piece of the machine. With a truss gantry crane, multiple moving parts will need to be looked at and maintained.
You will also require trained and experienced staff to look after the maintenance schedule and to make sure that all checks and works are completed promptly per the schedule. Gantry cranes can be very high, so your maintenance crew is going to need to have safety equipment before that can go near the machine. Once they have been geared up, they will need to check each of the struts for wear and warpage. All access ladders will need to be tested to make sure that all locking gates work and can be sufficiently secured so that no unauthorized people can gain access after working hour.
The electronic boards will need to have each of the fuses, and electrical connections checked to make sure that there can be no power outages or other issues that could potentially put peoples lives in danger. You will need to check all and any fuel inputs and check the fluids to make sure that they are consistent with what they should be and that no contaminants have entered into the system which could cause machine freezing.
All ropes and pulleys will need to be checked to make sure that each cable is in excellent condition and there-there are no frayed edges of split threads. Lifters need to look at to see if any snagging problems or splitters could cause system jamming.
All parts of the crane that have moving parts such as the rollers and gears are re-oiled so that they move smoothly and do not cause friction. Checks also need to be completed for any wear on any of the apparatus or associated parts. All slings and grab hooks again need to be examined for faults as does the generator or power plant that is supplying the type of power that is running the main hydraulic areas.
It is only by having a stringent safety and maintenance checklist and adhering to it day in and day out that will keep your machine running smoothly and keeping all machine operators and surrounding staff safe from harm. The last thing any large company needs when it has so much equipment and work requirements to complete is for a machine to break down during the workday. If this happened, the whole plant mat needs to to be closed while that one machine is being repaired. Once you have the truss gantry fixed again, you will need to wait to have a complete safety audit conducted to ensure that there are no other issues before operating still. Interested in overhead gantry crane? visit our website https://www.dafangcranez.com/